м. Біла Церква, пров. Будівельників, 1Б · +38 067 321 40 85 · +38 098 677 03 74 · office@ateng.com.ua

1B Budivelnykiv Lane, Bila Tserkva, Ukraine · +38 067 321 40 85 · +38 098 677 03 74 · office@ateng.com.ua

Надіслати запит
Send an enquiry

Category: Без рубрики

  • Tablet press ECO V AFR

    Tablet press ECO V AFR

    ECO V AFR tablet press

    • 15.0″ touch screen operator interface displaying the force of every punch at every revolution
    • Detection of defective tablets by force measurement
    • Compression force measured by load cell
    • Start-up reject function discharges tablets via a slide into the reject chute at every machine start and stop
    • Adjustable parameters such as speed, feeder speed, automatic lubrication, safety interlocks, hydraulic compression and many more

    General specification

    • Precision-machined nickel-plated head with lower punch
    • Double feeder with clockwise and anticlockwise paddle rotation
    • Pressure roller load: 100 kN / 10 tonnes for D tooling and 65 kN / 6.5 tonnes for B & BB tooling
    • Variable upper punch stroke from 1.0 to 7.0 mm for single layer and from 2.0 to 7.5 mm for bi-layer
    • Double-wall design for easy maintenance
    • SS 316 hopper with shut-off valve
    • Tablet parameters controlled from the side of the machine via compression and fill-depth sensors
    • Two-way SS 316 tablet discharge chute

  • Tablet press ECO V

    Tablet press ECO V

    ECO V tablet press – standard model

    • Ideal for high-volume production
    • Tablet press fully cGMP-compliant, with a robust four-pillar construction
    • AHCOS – automatic hydraulic overload protection system
    • Internal turret drive via high-torque worm gearbox
    • Main motor and feeder motor controlled by AC variable frequency drive
    • High motor power ensures no jerking or slipping, even when compressing large tablets
    • Automatic start-up / stop reject to separate tablets made at the beginning and end of a batch
    • Memory for 100 recipes

    General specification

    • Precision-machined nickel-plated head with lower punch
    • Double feeder with clockwise and anticlockwise paddle rotation
    • Pressure roller load: 100 kN / 10 tonnes for D tooling and 65 kN / 6.5 tonnes for B & BB tooling
    • Variable upper punch stroke from 1.0 to 7.0 mm for single layer and from 2.0 to 7.5 mm for bi-layer
    • Double-wall design for easy maintenance
    • SS 316 hopper with shut-off valve
    • Tablet parameters controlled from the side of the machine via compression and fill-depth sensors
    • Two-way SS 316 tablet discharge chute

  • Tablet press ECO IV

    Tablet press ECO IV

    ECO IV tablet press – standard model

    • Ideal for medium-output production
    • Tablet press fully cGMP-compliant in terms of design, materials, easy access, etc.
    • Turret driven by a robust external worm gear system
    • High motor power ensures no jerking or slipping, even when compressing large tablets
    • Main motor controlled by AC variable frequency drive
    • Forced feeding for bi-layer compression (optional)
    • Integrated electrical control panel
    • Automatic lubrication of the central column and upper and lower punches
    • Feeder motor controlled by AC variable frequency drive

    General specification

    • Precision-machined nickel-plated head with lower punch
    • Double feeder with clockwise and anticlockwise paddle rotation
    • Pressure roller load: 100 kN / 10 tonnes for D tooling and 65 kN / 6.5 tonnes for B & BB tooling
    • Variable upper punch stroke from 1.5 to 8.0 mm for single layer and from 2.7 to 9.0 mm for bi-layer
    • Double-wall design for easy maintenance
    • SS 316 hopper with shut-off valve
    • Tablet parameters adjusted from the front of the machine with control knobs
    • Robust central column design that withstands high loads

  • Tablet press ECO III SL AFR

    Tablet press ECO III SL AFR

    ECO III SL AFR tablet press

    • 15.0″ touch screen operator interface displaying the force of every punch at every revolution
    • Detection of defective tablets by force measurement
    • Compression and ejection force measured by load cell
    • Start-up reject function diverts tablets through a gate into the reject chute at every machine start and stop

    General specification

    • Nickel-plated turret (corrosion-resistant)
    • Hard-anodised aluminium gravity feeder
    • Pressure roller load of 120 kN / 12 tonnes
    • Variable upper punch stroke from 1.5 to 8.0 mm
    • Alloy steel (EN353) pull-down cam to reduce dust generation at upper punch entry
    • Turret driven by a robust external worm gear system
    • Tablet parameters adjusted from outside the machine using compression and fill-depth scales
    • Robust central column design that withstands high loads

  • Tablet press ECO III SL

    Tablet press ECO III SL

    ECO III SL tablet press – standard model

    • GMP model with 12 stations and “special” tooling
    • Heavy-duty electromagnetic clutch
    • AC variable frequency drive for the main motor
    • High-torque motor for better tablet compression
    • Ideal for effervescent tablets, veterinary and non-pharmaceutical production
    • Robust central column design that withstands high loads
    • Easily compresses round tablets up to 40 mm in diameter

    General specification

    • Nickel-plated turret (corrosion-resistant)
    • Hard-anodised aluminium gravity feeder
    • Pressure roller load of 120 kN / 12 tonnes
    • Variable upper punch stroke from 1.5 to 8.0 mm
    • Alloy steel (EN353) pull-down cam to reduce dust generation at upper punch entry
    • Turret driven by a robust external worm gear system
    • Tablet parameters adjusted from outside the machine using compression and fill-depth scales
    • Robust central column design that withstands high loads

  • Tablet press ECO III AFR

    Tablet press ECO III AFR

    ECO III tablet press – AFR model

    • 15″ touch screen operator interface displaying every compression force
    • Detection of defective tablets by force measurement
    • Compression and ejection force measured by load cell
    • Start-up reject function diverts tablets through a gate into the reject chute at every machine start and stop

    General specification

    • Precision-machined nickel-plated head with lower punch
    • Hard-anodised aluminium gravity feeder
    • Pressure roller load of 100 kN / 10 tonnes for D tooling and 65 kN / 6.5 tonnes for B & BB tooling
    • Variable upper punch stroke from 1.5 to 8.0 mm
    • Alloy steel (EN353) pull-down cam to reduce dust generation at upper punch entry
    • Turret driven by a robust external worm gear system
    • Tablet parameters adjusted from outside the machine with control knobs
    • Robust central column design that withstands high loads

  • Tablet press ECO III

    Tablet press ECO III

    ECO III tablet press – standard model

    • GMP model with 20 and 27 stations and “D” and “B” tooling
    • Heavy-duty electromagnetic clutch
    • AC variable frequency drive for the main motor
    • High-torque motor for better tablet compression
    • Ideal for effervescent tablets, veterinary and non-pharmaceutical production
    • Robust central column design that withstands high loads
    • Easily compresses round tablets up to 25 mm in diameter

    General specification

    • Precision-machined nickel-plated head with lower punch
    • Hard-anodised aluminium gravity feeder
    • Pressure roller load of 100 kN / 10 tonnes for D tooling and 65 kN / 6.5 tonnes for B & BB tooling
    • Variable upper punch stroke from 1.5 to 8.0 mm
    • Alloy steel (EN353) pull-down cam to reduce dust generation at upper punch entry
    • Turret driven by a robust external worm gear system
    • Tablet parameters adjusted from outside the machine with control knobs
    • Robust central column design that withstands high loads

  • Tablet press EP 700 AWC (automatic weight control)

    Tablet press EP 700 AWC (automatic weight control)

    EP 700 AWC tablet press (automatic weight control)

    • Automatic weight control by force measurement
    • Servo-controlled weight, pre-compression and main compression thickness
    • Ejection force measurement
    • Automatic fill track identification
    • 21 CFR Part 11 compliance for all Panel PC / HMI functions
    • Electromagnetic clutch in the main drive for smooth start-up at full compression load, and handwheel side for easy manual inching during changeover
    • Automatic 1st-layer tablet sampling for hardness control
    • Minimal dust generation during compression
    • Separate servo motor for fill-depth control of layers 1 and 2
    • Separate servo motor for compression force control of layer 1 and the finished tablet
    • 15″ HMI panel for machine operation

    General specification

    • Nickel-plated turret (corrosion-resistant)
    • Hard-anodised aluminium feeder with independent AC variable frequency drive
    • Pressure rollers rated at 100 kN / 10 tonnes
    • SS-316 stainless steel hopper with tri-clamp connection and control valve
    • Alloy steel (EN353) pull-down cam to reduce dust generation at upper punch entry
    • Direct turret drive via high-torque gearbox
    • “TOOL SAFE” overload protection system
    • Discharge chute for good, sample and rejected tablets

  • Tablet press EP 500 AWC (automatic weight control)

    Tablet press EP 500 AWC (automatic weight control)

    EP 500 AWC tablet press (automatic weight control)

    • Automatic weight control by force measurement
    • Servo-controlled weight, pre-compression and main compression thickness
    • Ejection force measurement
    • Automatic fill track identification
    • 21 CFR Part 11 compliance for all Panel PC / HMI functions
    • Electromagnetic clutch in the main drive for smooth start-up at full compression load, and handwheel side for easy manual inching during changeover
    • Minimal dust generation during compression
    • Separate servo motor for fill-depth control
    • Separate servo motor for compression force control
    • 15″ HMI panel for machine operation

    General specification

    • Nickel-plated turret (corrosion-resistant)
    • 3-drive paddle feeder for distributing and dosing the blend at high speeds
    • Pressure rollers rated at 100 kN / 10 tonnes
    • SS-316 stainless steel hopper with tri-clamp connection and control valve
    • Alloy steel (EN353) pull-down cam to reduce dust generation at upper punch entry
    • Direct turret drive via high-torque gearbox
    • “TOOL SAFE” overload protection system
    • Discharge chute for good, sample and rejected tablets

  • Tablet press EP 400 AWC (automatic weight control)

    Tablet press EP 400 AWC (automatic weight control)

    EP 400 AWC tablet press (automatic weight control)

    • Automatic 1st-layer tablet sampling in bi-layer mode
    • Full recipe management, data acquisition and control with Audit Trail
    • 4 password levels for users with different access rights
    • “TOOL SAFE” overload protection system
    • Automatic 1st-layer tablet sampling for hardness control
    • Load cell for pre-compression force measurement
    • Precise punch motion tracking with encoder
    • Separate servo motors for fill-depth control of layers 1 and 2 and compression force control of layer 1 and 2 tablets
    • 15″ HMI operator panel

    General specification

    • Nickel-plated turret (corrosion-resistant)
    • Feeder with clockwise and anticlockwise paddle rotation
    • Pressure rollers rated at 20 kN / 2 tonnes
    • Segmented double-wall cam design for easy maintenance and replacement
    • SS-316 stainless steel hopper with tri-clamp connection and control valve
    • Alloy steel (EN353) pull-down cam to reduce dust generation at upper punch entry
    • BI-LAYER mode with online 1st-layer sampling via touch screen (optional)
    • “TOOL SAFE” overload protection system (optional)